SPZD SPAZZER® BAR 20GA

$2.16
Write a Review
SKU:
96144
Weight:
0.87 LBS
Case Qty:
1350

*FREIGHT CHARGE APPLIES IF LESS THAN FULL SKID IS ORDERED

*TO ORDER CARTON QUANTITES, USE PART 93219 SPZD (25)

FACILITATES THE RAPID ERECTION OF INTERIOR, NONLOAD-BEARING STUDS

The Spazzer 9200 Spacing and Bridging Bar is a prenotched bridging and spacing bar that facilitates the rapid erection of interior, nonload-bearing, nonstructural studs into a rigid, accurately laid out gridwork that has excellent resistance to stud rotation and displacement. Spazzer 9200 bar is a 20-gauge (33mil) bar that is 50" long and prenotched to hold studs rigidly on 16" or 24" centers. The slots have been pre-engineered to hold studs in place by utilizing “shear” to bridge studs into a rigid gridwork.

Spazzer 9200 system fits in non-structural studs 2-1/2” and wider.

  • Saves up to 40% in combined labor and material costs.
  • Eliminates stud spacing layout.
  • Eliminates clip angles and the labor required to install them.

 

PRODUCT DATA & ORDERING INFORMATION

Product code Gauge Mils Design thickness (in) Size (in) Packaging Pcs./Skid Packaging Pcs/Box
SPZD 20 STR 33 0.0346 7/8 x 7/8 x 50 1350 25

Coating: G40 per ASTM C645
Yield Strength: 33ksi
ASTM: A645, C754

PACKAGING:

1350 pieces per Skid

INSTALLATION:

Insert the prenotched, 50" Spazzer bar through the appropriate stud punchouts and rotate the bridging bar to engage or grip the stud. Use the prenotched slots to automatically lay out studs on 16" or 24" centers. Press the Spazzer bar firmly into place. Overlap the last slot with the next piece of Spazzer and continue to repeat the process.

Videos Hide Videos Show Videos