33MIL (20 GAUGE) LATERAL BRACING CLIP USED TO SECURE 3/4" U-CHANNEL TO DRYWALL STUDS
The ClarkDietrich CC33 clip is used to secure U-Channel or Cold Rolled Channel (CRC) to non-structural wall studs. The wall stud friction fit design allows for as little as one screw for the connection to the U-Channel.
The CC33 clip is a stiffened, G90 galvanized steel clip that's tested and designed to facilitate the rapid, efficient installation of 3/4" U-Channel lateral bracing for non-structural interior wall framing constructed of ProSTUD® Drywall Framing or non-structural studs.
- The CC33 clip should not be used in studs over 6" wide
- US Patent No. D822,455
PRODUCT DATA & ORDERING INFORMATION
Thickness: 20 Gauge (33mil) 0.0346” des thickness, 0.0329” min thickness
Yield Strength: 33ksi
Coating: G90
Dimensions: Made to fit over 3/4” U-Channel and inside a drywall punchout
Packaging: (200) pieces per bucket
Product Weight: 0.12 lb. / piece
ASTM & CODE STANDARDS:
• Galvanized sheet steel meets or exceeds requirements of ASTM C645
• Sheet steel meets or exceeds mechanical and chemical requirements of ASTM A1003
• SDS & Product Certification Information
PACKAGING:
25 CC33 clips per bucket
INSTALLATION
CC33 clips are fastened using #8 self-drilling screws driven through the clip hole into the U-Channel. More than one screw may be needed depending on design. Design loads & tables can be found below.
