Ultra-Patch easily installs using standard drywall compounds and will not fuzz-up during sanding. One Ultra-Patch repairs holes up to three inches in diameter.
- Quickly repairs damage to drywall
- The most economical and permanent way to repair drywall
- Outperforms metal patches.
- Easily installs using standard drywall compounds.
PRODUCT DATA & ORDERING INFORMATION:
| Product code | width (in) | Type | PCS/Case |
|---|---|---|---|
| ULTP-2PK, ULTP-100, ULTP-500 | 6" | 10 count bag | 10 Bags of 10 |
INSTALLATION
- To apply, lightly sand area to be repaired.
- Apply drywall compound 1/8”-1/4” thick directly to back of patch.
- Place patch over center of repair and wipe down flat to wall using joint knife.
- Immediately skim-coat patch and let dry.
- Apply second coat, let dry, and sand. Compound that remains on backside of Perma-Patch makes patch very rigid in the damaged area.
CODE APPROVALS & PERFORMANCE STANDARDS
- ASTM C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- SDS Strait-Flex - Joint Tape For Joint Tape
STORAGE
- All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level
platform, and protected from weather and moisture.