Outlet-Patch is an electrical outlet-patch that will not fuzz-up during sanding.
- Pre-cut to fit standard receptacle boxes
- Repairs and reinforces mis-cut or damaged areas around receptacle box
- Very fast, extremely strong
PRODUCT DATA & ORDERING INFORMATION:
| Product code | width (in) | Type | PCS/Case | Cases/Pallet |
|---|---|---|---|---|
| OP-2PK, OP-100, OP-500 | 4-3/4" x 6-1/4" | 2 Pack Card | 50 Cards of 2 | 24 |
INSTALLATION
- To apply, lightly sand area to be repaired.
- Apply drywall compound 1/8”-1/4” thick directly to back of patch.
- Place patch over center of repair and wipe down flat to wall using joint knife.
- Immediately skim-coat patch and let dry.
- Apply second coat, let dry, and sand. Compound that remains on backside of Outlet-Patch makes patch very rigid in the damaged area.
CODE APPROVALS & PERFORMANCE STANDARDS
- ASTM C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- SDS Strait-Flex - Joint Tape For Joint Tape
STORAGE
- All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level
platform, and protected from weather and moisture.