LGPW60 PONY WALL LITE (16 GA) 60IN

$35.64
Write a Review
SKU:
94493
Weight:
7.10 LBS

*FREIGHT CHARGES APPLY IF LESS THAN 25 PCS ARE ORDERED*

PARTIAL WALL FRAMING CONNECTION TO FLOOR

The ClarkDietrich Pony Wall Lite is intended to support out-of-plane loading of cantilevered partial wall systems that are unsupported at the top track. Out-of-plane loads are transferred to the floor system through the base-plate, which is welded to the Pony Wall Lite stud member.

Product Dimensions
LGPW60 = 59-5/8" tall with 2-3/8" wide x 5-1/2" long plate

Material Specifications
Plate Material:  ASTM A36 3/8" thick hot rolled steel
Stud Material:  Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)
16ga (54mil), 0.0566" Design thickness, 0.0538" Min. thickness

ASTM:  A36, A653/A653M, A1003
 

PRODUCT DATA & ORDERING INFORMATION

Click the below Product Code to view Tech Datasheet

Product code Overall Height Packaging
LGPW60 59-5/8" tall Individually

INSTALLATION:

  • Install the Pony Wall Lite inside the track or directly to the floor structure. Anchor to the floor as designed by EOR. Attach the studs to both flanges of the Pony Wall Lite. A minimum of 2-1/2" stud member can be used.