*FREIGHT CHARGES APPLY IF LESS THAN 25 PCS ARE ORDERED*
PARTIAL WALL FRAMING CONNECTION TO FLOOR
The ClarkDietrich Pony Wall Lite is intended to support out-of-plane loading of cantilevered partial wall systems that are unsupported at the top track. Out-of-plane loads are transferred to the floor system through the base-plate, which is welded to the Pony Wall Lite stud member.
Product Dimensions
LGPW36 = 35-5/8" tall with 2-3/8" wide x 5-1/2" long plate
Material Specifications
Plate Material: ASTM A36 3/8" thick hot rolled steel
Stud Material: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)
16ga (54mil), 0.0566" Design thickness, 0.0538" Min. thickness
ASTM: A36, A653/A653M, A1003
PRODUCT DATA & ORDERING INFORMATION
Click the below Product Code to view Tech Datasheet
| Product code | Overall Height | Packaging |
|---|---|---|
| LGPW36 | 35-5/8" tall | Individually |
INSTALLATION:
- Install the Pony Wall Lite inside the track or directly to the floor structure. Anchor to the floor as designed by EOR. Attach the studs to both flanges of the Pony Wall Lite. A minimum of 2-1/2" stud member can be used.
