E683 SUPPORT CLIP 14 GA

$1.01
Write a Review
SKU:
60085
Weight:
0.33 LBS
Case Qty:
100

FEATURE A LONG LEG TO ACCOMMODATE GREATER STANDOFF FOR RIGID CONNECTIONS.

EasyClip™ E-Series™ Support Clips are used for rigid stand-off connections. The 4" wide leg provides extra length to achieve stand-off connections up to 3". They are commonly used in by-pass wall conditions, solid blocking attachments in joist framing and to secure rafter framing to the primary structure. These clips are pre-punched for faster and more accurate fastener placement.

PRODUCT DATA & ORDERING INFORMATION

Click the below Product Code to view Tech Datasheet

Product code Gauge Mils Design
thickness (in)
Size (in) Packaging
Pcs./Bucket
E683 14 68 0.0713 4 x 1-1/2 x 3 100

PACKAGING:

100 Clips per Bucket

INSTALLATION

Support clips are attached to the cold-formed steel (CFS) framing members using #10 minimum self-drilling screws driven through the clip holes into the steel framing. When not filling all holes, install fasteners symmetrically starting at the top and bottom edges and move toward the center of the clip. Clip can also be welded to the CFS framing. Connections to the building frame can be made with powder-actuated fasteners, drill-in concrete anchors or welding. When using the tabular values for a welded clip, provide a full weld to the structure, top to bottom, along the outside of the clip. A 3/4" minimum weld on the outside edge of the 1-1/2" leg is also required to control warping or to hold the clip in place before final welding.