CDMB 2" X 6" 12 GA BRIDLE HANGER

$4.57
Write a Review
SKU:
57127
Weight:
0.85 LBS
Case Qty:
1

FOR ATTACHING FLOOR JOISTS TO STRUCTURAL STEEL BEAMS OR WOOD LEDGERS

Bridle Hangers are commonly used to attach light-gauge C-joists to structural steel beams or wood ledgers. Connections can be made with screws, powder-actuated fasteners, drill-in concrete anchors or welding.

Single and double-wide bridle hangers are also available in other widths and depths.

PRODUCT DATA & ORDERING INFORMATION

Coating: G90
ASTM: A653/ A653M

Click the below Product Code to view Tech Datasheet:

Product code Gauge Mil Design
thickness (in)
Width (W) (in) Depth (H) (in) Packaging
Pcs./Carton
CDMB 2x6 12 97 0.1017 2 6 20

 

PACKAGING:

CDMB 2 X 6: 20 Hangers per box


INSTALLATION:

Attach bridle hanger to the primary frame as specified. When welding the hanger to the primary frame, a minimum of 1/8" x 2" fillet weld on each top flange is required. Distribute the weld equally on both top flanges. Uplift loads do not apply to weldon applications. Place joist into hanger and secure with fasteners. If bridle hanger is less than beam depth, provide back blocking.