CAN-PATCH RESIDENTIAL (100 count)

Easily installs using standard drywall compounds. Can-Patch will not fuzz-up during sanding.

• Pre-cut to fit standard residential ceiling lights
• Repairs and reinforces mis-cut or damaged areas around ceiling lights and can light holes
• Install in areas where patching cutouts were made too large
• Ceiling lights and can light relocation

PRODUCT DATA & ORDERING INFORMATION:

Product code	Size	Hole Size	Type	PCS/Case
CPR-100	8" x 8"	6-1/4" dia.	100 count Case	10 bags of 10

INSTALLATION

• To apply, lightly sand area to be repaired.
• Apply drywall compound 1/8”-1/4” thick directly to back of patch.
• Place patch over center of repair and wipe down flat to wall using joint knife.
• Immediately skim-coat patch and let dry.
• Apply second coat, let dry, and sand. Compound that remains on backside of Can-Patch makes patch very rigid in the damaged area.

CODE APPROVALS & PERFORMANCE STANDARDS