BB12 - CDBS BACKER BAR 12

$3.43
Write a Review
SKU:
90001
Weight:
1.03 LBS
Case Qty:
1

QUICK, EASY INSTALLATION

The ClarkDietrich Backer Bar was specifically designed to meet the demand for the attachment of multiple items and heavier items to interior partitions. 
Designed, tested and Patented by Bailey® .

Today’s building professionals require solutions to allow the attachment of such products and accessories to the interior partition walls. Traditionally, backing systems have been costly, time-consuming and not necessarily performing to the required code specified load requirements. A common solution was to use 20 gauge steel studs, which is now not practical since many of these interior partition walls require a sound rating of STC 50+. Backer Bar, designed for use on 25 gauge studs, will also provide the necessary support without any reliance on the Gypsum Board or degrading the Gypsum Board finish.

TYPICAL APPLICATIONS

  • Wall-Mounted Televisions 
  • Hospital Handrails 
  • Towel and Shower Bars
  • Cabinets and Shelves 


FEATURES AND BENEFITS

  • Exceeds the National Building Code of Canada (NBCC) and International Building Code (IBC) load requirements for grab bars
  • Offers approximately twice the load capacity of traditional plywood backing systems
  • Ultimate load capacity of over 1100 lbs., with or without gypsum board
  • Installs quickly and easily
  • Available in 12", 16" and 24" spacing
  • For use on non-loadbearing studs only

Canada Patent Pending – 2,811,362 
 
USA Patent – 9,062,455

PRODUCT DATA & ORDERING INFORMATION

Material: All Structural Material: Grade 50ksi min. yield strength, G90
33mils: 20ga STR, 0.0346”
Design Thickness, 0.0329“ Min. Thickness

Dimensions:
Leg: 1-1/4”
Width: 5”
Lengths: For 12”, 16" and 24”o.c spacing

ASTM & CODE STANDARDS:​